QDX GRAPHENE | GRAPHENE DETAIL SPRAY

What's it made from? 

Starting with a Si02 base, this detail spray uses some elements that are commonly found in durable sealants. These powerful polymers are then blended at very high speed using a high-shear reactor while adding a viscosity modifier and then finally the liquified graphene nano-platelets. This creates a grey liquid that has a slight thickness but is still sprayable. 

What are the features? 

This product is packing some interesting features, one of which is its unique ability to fill in defects, something that's almost never seen in a spray product. the result of this is a dramatic increase in gloss due to the darkening effect and visual smoothness of the paint after use.

The Si02 in this product is enhanced by the addition of graphene, which dramatically improves the slickness of the paint, water behavior and improves the bond and resilience of the product against chemicals and environmental effects. 

How does it fit into the wash process? 

QDX is a great last stage protection product that ticks some boxes others simply can't. It's almost liquid wax like in its abilities to enhance and protect yet comes in an easy to use spray. Use as a stand alone product, or as a topper for synthetic sealants and hybrid waxes like Graphene wax or Diablo PTFE wax. 

• First ensure your vehicle is clean and dry, as always the more preparation you can do to the vehicle prior to application the longer it will last, but as this is a fast and easy product to use this is not essential to still get good results. 
• Spray QDX Graphene lightly over the surface of your vehicle ensuring you only work on 1 panel at a time.
• Usually, 2-3 sprays are more than enough to cover an average-sized car panel.
• Spread the product using a clean, dry microfibre towel  There is no particular kind of towel that works best for this, although we would recommend our general weave microfibre as a great option. 
• Wait 1-3 mins and allow the product to cure. If in direct sunlight it will take much less time so keep a close eye on your work area. 
• Buff the cured product off the vehicle using a clean dry microfibre towel, we would recommend a plush towel like our 500gsm ultra-plush infinity wax plush buffing towel you will feel the slickness building massively during this process. It's also dead easy to remove. 
• Tempting as it may be to check out the water beading on this, please allow at least an hour before spraying any water on the product as it takes some time to fully develop on the surface of your paintwork and will be completely bonded after 12 hours.